sricam iegeek settings for tiny ip cam pro

#Sricam iegeek settings for tiny ip cam pro for android
#Sricam iegeek settings for tiny ip cam pro android
#Sricam iegeek settings for tiny ip cam pro code

IPM-HX1 (h264/rtsp, 2-w audio, motion detection, preset, relay, led) IPM-743 (h264/rtsp, motion detection, relay, led) IPM-722 (h264/rtsp, motion detection, relay, led) IPM-721S (h264/rtsp, 2-w audio, ptz, motion detection, preset, relay, led) PX-3760 (mjpeg, h264, rtsp/h264, 2-w audio, pt, motion detection, preset, led) PX-3744 (mjpeg, h264, rtsp/h264, 2-w audio, ptz, motion detection, preset, led) PX-3615 (mjpeg, 2-w audio, pt, motion detection, preset, led) HiChip/CamHi (p2p/h264, 1-w audio, ptz, preset, focus). TUTK (p2p/h264/jpeg, 2-w audio, ptz, preset, focus, iris). Profile S (jpeg, rtsp/mpeg4/h264/h265, 1-w audio, ptz, preset)

The list is constantly updated (August 7, 2020).

#Sricam iegeek settings for tiny ip cam pro android

Internal Android camera (front and back) is also supported to use the app as an IP camera or dashcam.

#Sricam iegeek settings for tiny ip cam pro for android

You can resolve this issue byġ) reconnecting to a non-5G Wifi signal on your smart phone orĢ) skip this step and setup the WiFi by going through the steps under 'settings'>'Network Setting' on the app.Tin圜am Monitor for Android supports all major vendors (350+) of network/IP cameras, DVRs/NVRs, and more than 10,000 ONVIF Profile S compatible cameras including cheap Chinese cameras. OR 2)the IP camera is too far from the router if using Wi-Fi connectiong.Ģ, If you fail to setup the Wi-Fi network in step 4-7, please make sure your sricam is not nonnecting to a 5G WiFi signal. Single Click for viewing and mulriple click if you want to go to settings.ġ, If you experience inconsistent signal, it could be due to 1)too many devices sharing the same internet network. Step4-8, Tap the play button, that's your camera panel. Step4-7, Then wifi settings will appear(This is for wireless connection) for you to set the camera's internet connection wirelessly. Step4-6, The dialog box will pop-up, Click 'Confirm' Step4-5, Input your ole admin password(default password) and re-input the new password you created(Note: Numerical only, 6-10 digits password)then click Modify. Step4-4, Change your device password for security purposes but you can skip it if you want Step4-3, Note: Here take camera, ID: 1069813 as an example Note: the 'Device ID' can br found on the label which is attached to the camera. Step3-3, After you registered your account, input the email & password you created and click LOG-IN Step3-2, Then input your email address and password and repeat password then click REGISTER.(Use a different password not your main email password)

Step3-1, Open SRICAM APP then click register tab(for new user) Method 2, Search 'Sricam' on Google play or IOS App store.

#Sricam iegeek settings for tiny ip cam pro code

Method 1, Scan the QR code to download the 'Sricam' APP. After your camera is set up, you can move the camera to your preferred location(the configurations are saved to camera system)ġ-2, Connect the camera to the network.(Connect the camera to a router or switch with a RJ-45 Ethernet cable.)ġ-3, Reset to the camera.(Keep pressing the reset button for 15 seconds.) This tutorial is only available for sricam outdoor ip cameras, such as Sricam SH024 Outdoor IP Camera, Sricam SP007 Outdoor IP Camera, Sricam NVS001 Introduction before starting set up Make sure of the following:ġ, Your router supports the 2.4GHz frequency band(802.11b/g/n).ģ, Your smartphone is connected to the internet with a WLAN/WIFI that the camera will connect with.ĥ, Your smartphone, camera, and router should be within about 8 feet during setup.